DOOR COMPONENTS
Special for door production in our Composite Profile Production Facility; quality, water resistant, cost effective, retractable and paintable door components are produced. In our production facility, alternative products are offered in a wide range of products for our customers who want to supply only door components thanks to the molds in various sizes and models. With the frame, moldings, composite boom, glass lath, composite leaf edge, leaf upper lath profiles, we produce in accordance with industry standards.
WOODEN COMPOSITE DOOR FRAME PROFILES
In our Wooden Composite Profile Production Facility, door frame profiles are produced in accordance with different wall sizes. Wooden Composite Door Frame Profiles have a standard 36 mm height and a width ranging from 70 to 240 mm. Since the cross-section thickness of our product is 4.4 mm and the profile internal structure is divided into chambers, it is resistant to impacts. Since the frame profiles are produced by extrusion method, there is no limitation regarding the frame length. Door frame profile of desired length can be produced. Raw profiles can be coated in the desired color and pattern in our production facility. Our raw profiles; Surface resistance, which is one of the important factors in coating (lamination) process, is lower than plastic profiles. For this reason, our adhesion quality is above the standards.
WOODEN COMPOSITE DOOR MATERIALS
Wooden Composite Door Moldings are manufactured by combining pvc raw material, wood chips and additives in the extrusion system. After production, moldings are coated in the desired color and pattern in lamination machines. There is no restriction on the length of the molding. Moldings of desired length can be produced. The transition nails of our moldings to the frames are gradual. In this way, since silicone and similar adhesives are not required during assembly, it provides cost and speed advantage for the applicator. The sectional thickness of the rib profile is 4.4 mm. This thickness makes our moldings more durable compared to their counterparts. As the moldings are mobile, they cover curvature and defects on the walls and tolerate measurement problems. Molding surfaces are suitable for hare operation
WOODEN DOOR SEREN
Russia, Ukraine and Turkey, we have obtained from the forest of pine, spruce and fir trees in Europe, the Middle East and Africa offer the service door manufacturers in our market. We reduce the risk of cracking and rotting of wooden door booms where we reduce the humidity level to 8% in drying ovens. We combine the trees that we have removed from the knots with the fingerjoint method and bring them back to the draft size. Finger Joint system increases the bending resistance of the doors and eliminates the cracking and breaking problems due to knots. Our standard sizes; It is 38x42x2100, 35x42x2100, 30x42x2100 mm. Depending on demand, production can be made in special sizes. There are 5 × 5 mm air ducts in our Wooden Door seres.
COMPOSITE DOOR SEREN
Composite door spar is produced by combining pvc raw material, wood chips and additives in the extrusion system. There is no length limit for this product, which is produced in standard dimensions of 38 × 42 mm. This product, which is absolutely not affected by water and moisture, can be used without hesitation in the wet areas of the places where the humidity is high. In terms of application, there is no difference from wood spreading. In wood cutting machines, it can be cut and milled with wood cutting tools.
JOUNDER TOOLS
There are 2 types of jounder tools used in the assembly of Wooden Composite Door Frame and Wooden Composite Leaf Seren. Jounder tools are made of flexible polypropylene material. Case wedges are used for mounting the cases. It helps the heads of the cases, which are cut according to the angle of 45 degrees, to reset. Thanks to the Case Jounder tools, it is prevented to open in the case joints after assembly. Composite jounder tools used for joining Wooden Composite Door Seren on the door leafs help resetting the heads of the boom cut 45 degrees to zero.
WOODEN COMPOSITE LEAF PROFILE
Composite Leaf Profile is produced by combining pvc raw material, wood chips and additives in the extrusion system. You can make special designs and create your own door models with this profile designed for 35 mm thick door leaves. When using this profile, edge banding is not required. Therefore, the cost of tape, glue and machinery is eliminated. The section thickness of this profile, which is 42 mm high and 99 mm wide, is 4.4 mm. There is no restriction on profile length. It can be produced in desired length. It is coated in desired color and pattern in lamination machines after production.
PVC Door Surfaces
Our Wooden Composite Wing Surfaces; It is produced by extrusion of PVC raw materials and additives. Our standard plate thickness is 1.5 mm. We can produce sheets up to a maximum width of 110 cm. We have 48 leaf surface models that we use as standard. We produce the desired colors and sizes from these models under vacuum and heat. In addition to our standard models, thanks to the molding room in our structure, we also produce door models specially for your request.
